Concealed Carry

Handguns: Are You Using or Abusing Your Guns?

extractor and breech face

Recently, one of the teenaged grandkids made the often repeated comment, ‘You only live once. (YOLO)’ I squashed this thought with both feet. True enough, we are promised but one life, but I pointed out that life isn’t short, it is long. Things you do in your youth may have consequences for the rest of your life. So, it is with firearms and the way you treat them. If you use a quality firearm and take good care of it, the piece will last almost indefinitely. Abuse it, and a few years at best are all you will get out of it. As a writer and experimenter, I test firearms. Many are interesting, a few are disappointing, and a very few completely arrest my attention. Some of my personal firearms would be difficult to replace. As an example, the Smith and Wesson 19-4 represents a high point in American revolver manufacture. The same goes for the Heckler and Koch P7M8 in 9mm handguns.

I do not own a safe queen. The safe is temporary storage. The true nature of a Combat Magnum is on the range, in the field or on the hip, not in the safe. While my primary focus is handguns, I also own a number of good rifles. There is nothing quite like the Savage Model 20 lightweight hunting rifle. This 1922 production date .300 Savage rifle would demand big bucks and a long search to replace. I am letting my grandchildren worry about that. I will hunt with it as long as I am able.

These firearms have lasted not because I have babied them but because I have maintained them. (Often the previous owner maintained the piece, but choosing a well maintained used gun is a subject for another time.) The proper maintenance, lubrication, and periodic replacement of high wear parts have resulted in longevity and excellent service. My program is the result of study, observation, practical experience, and bending the ear of experienced gunsmiths. I have learned not only proper procedure and maintenance, but which parts should be kept on hand for future repair.

Wear Isn’t a Bad Thing

Wear isn’t something to be avoided. All machines exhibit wear as they are used—as they run we might say. Pistol magazines in particular must be considered a renewable resource. What must be avoided is eccentric wear. We must be aware of changes in the pistol’s finish and use preservative oils more aggressively. We must be aware of changes in the firearm’s slide velocity.

As a recoil spring becomes weaker, slide velocity increases and battering results. Peening of parts may occur. The tell tale first sign of a weak spring is the inability to feed the last round in the magazine. The slide lock may also begin to lock up at the wrong angle on the magazine follower, which may damage the slide stop and the follower.

A Happy Gun

Few shooters understand how important cleaning is. The useful life and reliability of the handgun depend upon constant cleaning and maintenance. I have observed handguns with carbonized deposits under the extractor and brass particles under the extractor. In one incident a student in one of my classes suffered a locked up action in his DAO .380 pistol. After I completely disassembled the handgun, it was discovered that a small hard object—perhaps a chip off of a breath mint—had lodged in the action.

Carrying a handgun without a holster in the pocket is non professional. A cleaning got this handgun back on track. Despite this experience, I believe that self-loaders are more likely to function with foreign material intrusion than revolvers. The individual chambers must be kept clean and particular attention paid to the chambering step.

The majority of cracked forcing cones and blowups in magnum revolvers are a result of lead build up in the forcing cone. The use of soft .38 caliber projectiles for handloading, and then firing hundreds in practice, followed by a poorly motivated cleaning results in skyrocketing pressure when the next magnum is fired.

When cleaning the firearm, you must be comfortable with the field strip. The Beretta 92 is among the simplest handguns to maintain. A 1911 with a full length guide rod is one of the more complicated.

The firearm should be cleaned and inspected. I have already mentioned debris under the extractor. When a recoil spring has lost an inch of its free length, it should be replaced. Magazine springs are more difficult to gauge, but the difference in strength between a well worn or a new magazine spring is noticeable. Recoil springs on average have a useful life of 5,000 rounds. The new Glock seems good for longer use. The heavy momentum 10mm and .357 SIG pistols will not last as long. The firing pin spring should be replaced periodically as well. The revolver may occasionally need a trigger return spring.


A firearm must be lubricated to prevent wear and allow normal function. A firearm to be fired extensively on the range should be heavily lubricated. Lubrication will blow off during firing. A firearm that is carried for personal defense needs little lubrication. It will not be fired more than a magazine load during a critical incident.

However, something many shooters miss is that the personal defense handgun should be cleaned and lubricated on a regular basis even if it isn’t fired. Dust, lint, and debris are accumulated, and so are salts from the body that may cause corrosion. Lubrication runs off of the firearm. Some handguns are more desirous of lubrication than others.

Spare Parts

If you have suffered breakage of a small part and seen the all too frequent OUT OF STOCK symbol, it isn’t something you soon forget. I do not keep a spare set of tires for the truck in the barn because there are a half-dozen tire stores in my home town. I have on hand tools for normal maintenance of both the truck and the Colt.

For parts that may take a few days to get, I order a few parts ahead. This means a set of grips and grip screw bushings for the Colt and the Beretta, an extractor for the Colt, spare magazines for each handgun, and items particular to the individual firearm. The 1911 should have a spare recoil spring guide on hand. They do not break, but 1911 users lose them on a regular basis. A spare link isn’t out of the question. You must understand how to fit the link and the extractor as well.

You may pre fit the extractor—assuming you own but one 1911. The Beretta should have a spare locking block (wedge) on hand. A CZ 75 used in competition may need the extractor replaced every 8,000 rounds. Smith and Wesson revolvers sometimes need a trigger return spring. The Glock also sometimes breaks trigger return springs. Older generation Glocks sometimes lose the front sight. If you have not yet replaced the original sights with iron sights, now is a good time.

Spare magazines should be on hand. Three magazines is a realistic minimum, with one in the gun, one on the belt, and one resting. Five or more is better. They should be marked 1, 2, 3, and so on in order to limit confusion in the case of a malfunction. The cost of training, ammunition, and safe keeping is more than the amount of the initial purchase.

Purchasing a first quality handgun will be money well spent. Think hard before purchasing an older handgun for personal defense. The gun butcher is busy, and I have seen Smith and Wesson revolvers—as well as Colts—that appeared to be in good condition, but would not fire because of poorly conceived action work. 1911 handguns with poor aftermarket parts and fitting are the worst offenders.

On occasion, I have seen police trade in handguns in deplorable shape. One was a SIG that was corroded. Another was a Beretta Vertec with the firing pin channel enlarged, resulting in primer flow back. I appreciate older models, but it is best to start the journey with a new handgun. Some of the older handguns present a difficulty in obtaining spare parts. If you do not have the barrel nut tightening tool with the Dan Wesson revolver, you cannot tighten the barrel against inevitable loosening. Without the HK P7M8 striker removal tool, you cannot maintain the handgun.

An old adage is, ‘buy cheap buy twice.’ The same goes for maintenance, do not be penny wise and dollar dumb. The best firearms ever made are available today. By following a regular maintenance schedule and performing a regular replacement of high wear parts, these firearms will render good service practically indefinitely.


About the Author:

Bob Campbell

Bob Campbell’s primary qualification is a lifelong love of firearms, writing, and scholarship. He holds a degree in Criminal Justice but is an autodidact in matters important to his readers. Campbell considers unarmed skills the first line of defense and the handgun the last resort. (He gets it honest- his uncle Jerry Campbell is in the Boxer’s Hall of Fame.)

Campbell has authored well over 6,000 articles columns and reviews and fourteen books for major publishers including Gun Digest, Skyhorse and Paladin Press. Campbell served as a peace officer and security professional and has made hundreds of arrests and been injured on the job more than once.

He has written curriculum on the university level, served as a lead missionary, and is desperately in love with Joyce. He is training his grandchildren not to be snowflakes. At an age when many are thinking of retirement, Bob is working a 60-hour week and awaits being taken up in a whirlwind many years in the future.

Published in
Black Belt Magazine
Combat Handguns
Rifle Magazine
Gun Digest
Gun World
Tactical World
SWAT Magazine
American Gunsmith
Gun Tests Magazine
Women and Guns
The Journal Voice of American Law Enforcement
Police Magazine
Law Enforcement Technology
The Firearms Instructor
Tactical World
Concealed Carry Magazine
Concealed Carry Handguns

Books published

Holsters for Combat and Concealed Carry
The 1911 Automatic Pistol
The Handgun in Personal Defense
The Illustrated Guide to Handgun Skills
The Hunter and the Hunted
The Gun Digest Book of Personal Defense
The Gun Digest Book of the 1911
The Gun Digest Book of the 1911 second edition
Dealing with the Great Ammunition Shortage
Commando Gunsmithing
The Ultimate Book of Gunfighting
Preppers Guide to Rifles
Preppers Guide to Shotguns
The Accurate Handgun
The Mission of Cheaper Than Dirt!'s blog, The Shooter's Log, is to provide information—not opinions—to our customers and the shooting community. We want you, our readers, to be able to make informed decisions. The information provided here does not represent the views of Cheaper Than Dirt!

Comments (7)

  1. Great article.
    I am a 1911 owner and can appreciate the idea of having spare parts and spare magaxines.
    Spare parts are like insurance, your glad you have it when you need it.
    Back in 2011 while I was still a Police Officer I purchased a Springfield Armory Range Officer 1911 45ACP 5″.
    I replaced all the springs with Wilson Combat springs and have since installed the Wilson Combat Flat Spring Guide Rod System.
    I replaced the firing pin,extractor,ejector with the Wilson Combat Bullet Proof parts.
    I have always used Wilson Magazines in my 1911s, as far as im concerned they are the best out there for the 1911 platform.
    I keep replacement springs and other vital parts on hand as I am a firm beliver in Murphys Law. Have always kept my weapons very well maintained.
    I replaced the Adj. Sight with Adj. Night sights from Kensight, as far as I know they are the only company making Adj night sights for the RO..
    I carried the Springfield R.O. as my duty weapon until my retirement in 2015.
    A properly well maintained pistol will never fail you on its own as long as it is taken care of and you do not have a part break on you.
    The Springfield Armory Range Officer 1911 45 ACP 5″ has been 100% reliable from day one.
    My life depended on my firearm always working at any time under any conditions.
    Keep you weapon well maintained and use quality parts like it says in this article and it will last you a life time.

    1. I kept reading after the model 19 comment. You missed the point. The author was referring to the era of S&W in which they produced guns of the highest quality and bluing, of which the Model 19 included, are highly sought after today.

  2. Excellent article especially the reminder to periodically clean and lubricate weapons “that just sit in the safe”. My “safe is half of a closet that is enclosed with 3/16 plate with two Abus locks on the door which is fabricated from the same plate and 1 1/2 x 3/16 steel tubing. Along with the weapons is a goldenrod dehumidifier AND a radiator style heater. The space is about 3 x 3 x 8 ft.
    One thing that i’d like to add is that if you have additional magazines besides the three suggested, do not keep them loaded and unless you use the three on a daily basis only load them two thirds full as the magazine springs will degrade if left under constant tension. I have Paraordnance magazines in 15 rd capacity and I load ten rounds. It is too bad that the quality of these springs has degraded to this point, but that is life in the modern world!

    1. Your magazine advice is internet hoopla that you continue to spread like a gossipy teenager. I have over 75 magazines of 9mm, 5.56, 7.62 and .40 caliber that remain loaded and have been kept this way for over 15 years. They all shoot flawlessly and their springs are just as tight as the day I purchased them. The consistent compressing AND decompressing is what wears a spring…..NOT EITHER OR.

Your email address will not be published. Required fields are marked *

Time limit exceeded. Please click the reload button and complete the captcha once again.

Your discussions, feedback and comments are welcome here as long as they are relevant and insightful. Please be respectful of others. We reserve the right to edit as appropriate, delete profane, harassing, abusive and spam comments or posts, and block repeat offenders. All comments are held for moderation and will appear after approval.